lorem ipsum dolor sit thumb
lorem ipsum dolor sit thumb
lorem ipsum dolor sit thumb
lorem ipsum dolor sit thumb
lorem ipsum dolor sit thumb

9 Elements Oil Filled Radiator

MODEL:33LCJ

8433325188436

  • Product specifications |

    Not support downloads

  • Instruction manual |

    Not support downloads

  • Instruction manual |

    Download

  • Product certificate |

    Not support downloads

  • Recipe |

    Not support downloads

  • Video |

    Not support downloads

  • Video |

    Not support downloads

Heat up quickly,brings warmth to the whole family

9 pieces of slot fins to heat up efficiently,the air flow naturally,raise the temperature fast and warm every corners to the home,say goodbye to the cold.

Adjustable knob

Adjustable power settings with 800W,1200W,2000W

Double U-type heating tube

Double U-type tube heating with 4 heating elements,360 ° three-dimensional vortex effect, reduce the heat load of heating tube, higher thermal efficiency, faster heating speed.

High quality slot fin

125mm 1.0mm double-layer high-quality and high-density carbon steel plate, which is soild, safe and high pressure resistant;Wide oil circuit design provides good fluidity, heat up faster, and also speed up heat dissipation

Intelligent temperature control, getting warm comfortably

Intelligent temperature control function, when the room temperature reaches the set temperature, the heater stops heating and enters the standby mode.When the room temperature is lower than the set temperature and the heat supply is restored.

With working indicator light

When the indicator light is off,the heater enters the standby mode.The indicator light is on,the heater is working.

Silent heating, no light and no smell, enjoy comfortable sleep.

Over heating protection

Overheating protection built in,when the temperature exceeds the safe temperature limit, the power will be automatically disconnected,you can use free from worry.

Anti-tilting protection

When the heater tripping over 30°,the power will be cut off automatically to prevent the accident

Convenient handle

The heater can be moved easily by one hand,which can be used in many places

Take-up reel design

Simple take-up reel, neat and convenient,less space occupied, makes the wire is no longer loosely

Caster assembly for easy moving

360° solid castor, which can move freely, convenient and labor - saving.

Assemble caster in 30s

1、Turn the heater upside down,attach the wheel holding plates onto the heater.

2、Thread the U-type screw through the wheel holding plates.

3、Insert the butterfly nuts and tighten them securely.

4、Use the same method to install another wheel holding plates.

Cautions

1. Please keep it upright. Do not put it upside down or obliquely to prevent the heater run dry.

2. Do not cover other articles on the heater, or the heat can not be distributed in time, which may cause short circuit or fire disaster.

3. Hands must be dry during operation to avoid electric shock.

4. If the power cord is aging, knotted or the plug is damaged, please stop using it immediately and go to the professional maintenance center for maintenance. Do not dismantle it by yourself.

5. Disconnected the heater before cleaning,maintaining and moving.

6. Do not use the same socket with other high power appliance.

7. To avoid the burns,do not directly touch the heater surface with exposed skin.

8. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.Avoid direct sunlight.

9. Do not use the heater near bathtub,shower or swimming pool.

10. Do not knock or vibrate the heater when it is working,it may cause the heater stop working.

11. Do not use outdoors.

12. Always unplug the heater when it is not in use.

13. Use wet cloth(with a little cleaning agents) to clean the only the external surfaces of the heater,do not use corrosive cleaning agents or solvents,do not rinse the heater with water.

You may be interested in